Classe Audio CDT-300 owner manual Status Version info Sensors, CAN-Bus, Features

status

version info

sensors

CAN-Bus

features

The status screen provides several items of information on the currently playing disc, as well as access to information on the software used in and the internal sensors of the CDT-300.

The version info button on the status screen takes you to the version information screen. From time to time Classé develops new software that adds features or enhances the operation of the DVD transport. Each new software version has its own Version Number. The Version Info Screen displays the Version Number of the software that your unit is running. The latest software is always posted on the Classé website (www.classeaudio.com). If the version number displayed on the Version Info Screen is lower than the version posted on the Classé website, you may want to update your unit. Simple and detailed updated instructions are also provided on the website. If you ever have occasion to call our technical support people to ask a question not covered in this manual, they may want to know precisely what software your unit is running. Having this information available will help them to give you the best possible service.

The sensors button on the status screen takes you to the sensors screen, which displays information about several internal sensors within the CDT-300. It is unlikely you might ever need the sensor information, unless directed to do so by a customer service representative at Classé in order to help troubleshoot some unexpected problem.

Classé’s Controller Area Network, or CAN-Bus, opens the way to a new level of interaction between our Delta range of amplifiers, preamps, processors and source components. When the CDT-300 is connected with CAN-Bus, the different elements of a Delta series system are in constant communication, creating a “global” network that delivers system wide status information and shared operational features, all through the touchscreen display.

CAN-Bus will allow a single Delta series touchscreen to:

•Display status information for every connected unit, including amplifiers which do not have a touchscreen display.

•Create a “PlayLink” that allows an SSP or Preamp to automatically switch to the correct input when a Delta series source component starts playback.

•Adjust the global system brightness.

•Configure the entire system to go in and out of standby at the touch of a button and also bring individual components in and out of standby.

•Mute any connected unit.

27