Classe Audio CDT-300 CAN-Bus shared features, Configuration Operate AC status Status Name

CAN-Bus shared features

configuration

operate

AC status

status

name

30

The touchscreen will then display the CAN-Bus devices screen, which lists connected Delta series components by model & serial number.

Highlighting a unit on the CAN-Bus devices screen identifies it as the target unit. The front panel LEDs of the target unit will start flashing (unless you highlight the unit that you are using to access CAN-Bus).

Once you have chosen the target unit press select. The target unit’s LEDs will stop flashing and the touch screen will list the CAN-Bus features available to it. Some CAN-Bus features are shared by all models, some are specific to individual models.

The following CAN-Bus features are shared by all models.

Selecting configuration will present the CAN-Bus configuration screen allowing access to name, global brightness, and global standby features.

The operate settings allow you to bring the target unit in and out of standby, or mute. This key will be disabled for the unit whose touchscreen you are using to access CAN-Bus.

The AC status screen displays information from the target unit’s electrical supply sensors. Two screens are available, with the second accessed by selecting more.

The status screen is the simplest way to access essential information about the target unit. It displays the target unit’s model number, software version, operational status and serial number.

Allows you to set the name that this component will be listed under in the CAN-Bus devices screen. The name will appear next to the unit model and serial number, and facilitate the identification of units in large systems.