Classe Audio CP-500 Specifications, Frequency response, DC - 200kHz ± 0.1dB, 0.003%, 5Vrms, 10Vrms

36

Specifications

All specifications are accurate at the time of printing. Classé reserves the right to make improvements without notice.

■	Frequency response		DC – 200kHz ± 0.1dB
■	Distortion (THD + noise)		0.003%
■	Maximum input voltage (single-ended)		5Vrms
■	Maximum input voltage (balanced)		10Vrms
■	Maximum output voltage (single-ended)		10Vrms
■	Maximum output voltage (balanced)		20Vrms
■	Gain range		-100dB to +14dB
■	Input Impedance		100kΩ
■	Output Impedance (main output)		100Ω
■	Signal-to-noise ratio (ref. 10Vrms input)		100dB
■	Channel separation		better than 100dB
■	Crosstalk (any input to any output)		better than -120dB @ 1kHz
■	Rated power consumption		30W
■	Idle power consumption		29W
■	Mains voltage	determined by the needs of country for which
			the unit was manufactured;
	Overall dimensions		cannot be reset by dealer or user
■			Width: 17.5” (445mm)
			Depth: 16.5” (419mm)
	Net weight		Height: 4.75” (121mm)
■			26lbs (12kg)
■	Shipping weight		33lbs (15kg)

For more information, see your Classé dealer, or contact:

Classé Audio

5070 François Cusson

Lachine, Quebec

Canada H8T 1B3

Telephone +1 (514) 636-6384

FAX +1 (514) 636-1428

http://www.classeaudio.com email: cservice@classeaudio.com

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved. i-Command™ is a trademark of Equity International, Inc. All rights reserved.

AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.