Classe Audio CP-500 Unpacking and Placement, placement ventilation custom installations

Models: CP-500

1 38
Download 38 pages 52.6 Kb
Page 6
Image 6
placement

unpacking your preamplifier

Important!

placement

ventilation

custom installations

serial number

6

Unpacking and Placement

Carefully unpack your preamplifier according to the supplied instructions, and remove all accessories from the carton.

Keep all packing materials for future transport of your Classé product. Shipping your new component in anything other than its purpose-designed packing material may result in damage that is not covered by the warranty.

As with any preamplifier, it is best to place the CP-500 centrally within your system, since it is the hub to which all other components are connected. It should also be located at a convenient height for both visibility and use, since you generally interact with your preamplifier more than any other component (changing inputs, adjusting volume, etc.).

Note that adequate clearance for the AC cord and connecting cables must be left behind the CP-500. We suggest leaving eight inches (20 cm) of free space behind your preamplifier to allow all cables sufficient room to bend without crimping or undue strain.

Classé recommends that the unit not be placed directly on the top surface of a power amplifier (or any other heat source).

Your Classé preamplifier generates a certain amount of heat in the course of normal operation. Be sure to allow three inches of clearance above it and three inches to each side to allow heat dissipation through air circulation. Avoid placement on soft surfaces that would restrict airflow (such as plush carpeting).

Drawings are included in this manual to facilitate special installations and custom cabinetry (see the section Dimensions). An optional, purpose-designed rack mount kit is available for this product. Contact your Classé dealer for more information.

The serial number for your preamplifier is found on the rear of the unit. Please note and record this number on the page entitled Important Safety Instructions for your future reference.

Page 6
Image 6
Classe Audio CP-500 owner manual Unpacking and Placement, placement ventilation custom installations, serial number