Classe Audio CP-500 owner manual 3Navigation Keys, 4Fkey Controls

Note:

20

3Navigation Keys

The central section of the remote control contains the navigation keys. This array of buttons is similar to what you may have seen on remote controls for DVD players, and is used for navigation of the menu system of the CP-500.

•Home returns you to the normal input selection controls normally shown on the LCD screen on the front panel of the CP-500. This provides a quick way to get back to normal operation, regardless of how deep you might be in the menu system.

•Menu serves two functions: it calls up the menu system when you need it in order to adjust something to your preference; once within the menu system, pressing Menu returns you to the previous level of the menu system. If you press Menu when at the top level of the menu system, it will take you back out of the menu system to the normal display.

•The Bal (balance) key takes you directly to the balance screen in the menu system; once there, you can use the navigation keys on the remote to select either the left or right buttons on the LCD touchscreen, depending on which way you wish to move the balance. Adjust the relative left-right balance of the system by using the Enter key on the remote to “press” the appropriate button on the display.

•Up/Down/Left/Right keys allow you to move within a particular menu screen, changing the highlighted item up/down/ left/right as you like, from the comfort of your listening position.

•The Enter key allows you to select the highlighted item, having the same effect as if you had pressed the button on the LCD touchscreen.

4Fkey Controls

The CP-500 remote control can also control user-defined functions as well. The F1/F2/F3/F4 keys are available for controlling aspects of the CP- 500 not covered by the other buttons on the remote control.

You are able to choose what the CP-500 should do in response to receiving the infrared signal that a particular Fkey has been pressed. The list of possible functions is quite extensive, and is found in the menu system (see the next section in this manual, entitled The Menu System).

The Fkeys on all Classé remote controls issue the same infrared commands. This saves you from having to be sure you have picked up the proper remote, since all your Classé remotes will perform the same function for each Fkey.