ClearSounds TALK500 ER manual Copy From The Caller ID To The Phonebook, Troubleshooting Guide

Models: TALK500 ER

1 64
Download 64 pages 56.87 Kb
Page 17
Image 17

Copy From The Caller ID To The Phonebook

You can copy Caller ID information to the phone book while you are reviewing the Caller ID information.

Select the required Caller ID memory location by pressing or .

Press and hold MENU button for two seconds, display will show

COPY TO MEMORY.

Press DIAL button, display will show SAVED!

TROUBLESHOOTING GUIDE

No dial tone

1Check that all phone cord connections (including the curly cord) and

AC Adapter are securely plugged into the telephone & wall jack.

2Check that the phone is in the correct dialing mode, Touch-Tone / Pulse Setting.

3Plug another phone into the jack to make sure your phone service is functioning properly.

Call will not dial or dials very slowly

1Check that the phone is in the correct dialing mode, Touch-Tone / Pulse Setting

No audible ringer

1 You may have too many extensions on your line. Try unplugging a few devices. Having too many telephones /accessories can also create problems such as low ringer volume or impaired quality during calls.

No amplification

1Check to see if the amplify button is “ON”. The red light should be lit.

2Check the AC Power Adapter and make sure it is plugged into the wall and into the appropriate jack on the phone.

Noise, Static, Interference while using the handset

1 A filter may be required for homes with DSL line or near Radio towers.

There is a red light that continues to flash

1 You have un-reviewed Caller ID / Call Waiting information or missed a call.

Caller ID information does not show

1Make sure you are subscribed to Caller ID through your local phone company.

17 – ENGLISH

Page 17
Image 17
ClearSounds TALK500 ER manual Copy From The Caller ID To The Phonebook, Troubleshooting Guide