INSTALLATION
Installing Batteries in the Phone
Your telephone requires four AA batteries (not supplied) in case of network power failure for LCD backup & operations. When appears on the display or the display dims, replace the batteries with new batteries. Note: Should you choose not to install batteries - the telephone numbers in memory and the voice recordings are stored in
1Before opening the battery compartment, make sure the telephone is disconnected from the telephone line and the power supply.
2Use a
3Insert 4 AA batteries into the compartment as indicated by the polarity symbols.
4Snap the battery compartment door back into place.
Installing Batteries in the Pendant
Your pendant comes with one 12V A23 battery. When the LED on the pendant dims, replace the battery. Using a screwdriver, open the battery cover, insert a new battery with the correct polarity, and replace the battery cover.
Battery Notes:
1Replace batteries quickly to save records.
2Use only fresh batteries of the required size and recommend type.
3 Do not mix batteries of different size or type.
4Always remove old or weak batteries. Batteries can leak chemicals than can damage electronic parts.
Connecting The Telephone
1Plug one end of the telephone line cord into the TEL.LINE jack at the back of the telephone base.
2Plug the other end of the telephone line cord into the phone jack on the wall.
3Plug one end of the coil cord into the handset’s modular jack.
4Plug the other end of the coil cord into the left side of the telephone base.
Note: Peel the plastic label from your phone’s display before using your phone.
4 – ENGLISH
