View the Caller ID Memory
•Press 
to review more recent calls. The CALL# will decrease.
•After you view the most recent data in memory, the display will show END OF LIST.
•Press 
to review older calls. The CALL# will increase.
•After you view the oldest data in memory, the display will show
END OF LIST.
•If the data in memory is being reviewed for the first time, the
NEW icon will be lit.
•The NEW CALL LED will turn off if you review the data.
NOTE: If no key is pressed within 20 seconds, the display will display the total call counter, new call counter, current time and date.
Erase The Caller ID Memory
Select the required Caller ID memory location by using the or 
button.
To delete single memory, press DELETE button once. The display will show the DELETE?. Press DELETE button for 2 seconds. The data for that call will be erased, and the CALL# and Caller ID information will be updated.
To delete the entire memory, press and hold DELETE button until the display shows DELETE ALL?. Press DELETE for 2 seconds until NO CALLS appears on the display. Both the total call and new call counters will become zero, and the current time and date will be displayed.
Call Back (Redial) From The Caller ID Memory
With the handset hung up on the base.
•Select the required Caller ID memory location by pressing 
or 
.
•Press DIAL button, the speakerphone will turn on automatically and dial the selected number.
Lift the handset or press the 
button, select the required Caller ID memory location by pressing 
or 
, then press DIAL button.
Note: If the Caller ID number is 10 digits, press DIAL button once, the unit will insert “1” before the Caller ID number automatically. You can press 
button to select insert “1” or not. Press DIAL again, the speakerphone will turn on automatically and dial the displayed number.
