Recording an image
1.Open TFT , the camera will be on automatically. 2.Press the MODE button, and choose the capture mode.
3.Point the camera at the subject, and use the monitor screen to compose the image. 4.Holding the camera still, gently press the shutter to release button.
When the image shown on the screen turning left, indicating the image is recorded.
In standby mode, press [MENU] , you can select the white balance, EV Shift, resolution etc. press [MENU] back to standby mode.
Before recording, press the WT button can zoom in or zoom out. This cause the zoom indication to appear on the display.
Press |
|
| to select the flash mode. Each press |
| of cycles the flash mode. This camera has three | ||
modes of flash: Auto, Flash off, Flash on. |
|
| |||||
Press |
|
| to select the mode of capturing. This camera has four modes of capturing : single, | ||||
|
| ||||||
continuous, 10sec |
|
| |||||
When shooting a close subject, please turn the macro switch to |
| , an icon will appear on the | |||||
| |||||||
| |||||||
display. The distance of macro is 0.20m~0.30m. |
|
| |||||
10
