Cobra Electronics 75 WX ST Installing Microphone Hanger, CB Antenna Installation

INSTALLATION

INSTALLATION

MICROPHONE HANGER

10

INSTALLING

MICROPHONE

HANGER

1.Hold microphone hanger in location desired for

mounting. Make certain that nothing will interfere with the hanger’s installation.

2.Mark the location for the three mounting screws (screws included).

3.Drill and mount microphone hanger.

CB ANTENNA INSTALLATION

For the most reliable operation and maximum range, Cobra recommends using a vertically polarized, quarter wave length whip antenna (illustration A).

Shorter, loaded-type whips are adequate when maximum range is not required (illustration B).

NOTE: Mobile installations (cars, trucks, boats, etc) should be made only with a non-directional antenna system.

•A standard antenna connector (Type SO-239) is provided on the Connector Box for easy connection to a standard PL-259 cable termination.

•Cobra antenna models are recommended; see your local CB dealer or order directly from Cobra. See order form on page 40.

•For maximum efficiency in boat installations, a ground plate is required, unless the vessel has a steel hull. Consult your CB dealer for information regarding an adequate grounding system.

CB ANTENNA

11

A

B