Operating Your Radio
Call Tone Select
Setup Mode Programming
Call Tone Select continued
To Set Call Tone:
1.From the previous press of the Call/Enter/Setup button, the LCD will display the letter “C” and the current Call Tone number (01 through 10).
2.Press the Channel Up/Down button to select a different Call Tone. An example of each call tone will sound for 1.5 seconds.
3.Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming.
NOTE: Call Tones are not usually used for Marine VHF communications. We allow you to turn it On for
ATIS ID Programming
Operating Your Radio
ATIS ID Programming
•
The Automatic Transmission Identification System (ATIS) feature of this Cobra radio is used to identify marine vessels in some inland waterways of European countries that require ATIS transmission. An ATIS ID number is required to operate the ATIS feature. The ATIS ID number is derived from your vessels call sign. You must enter your ATIS ID number into this radio before the ATIS system will become functional.
Please consult your local dealer for questions about local ATIS requirements. The use of ATIS is prohibited outside the European inland waterways covered by the Basel Agreement.
With this feature activated the vessels ATIS ID number is transmitted after every push of the Talk button.
Roger Beep Mode
Key Tone Mode
ATIS Mode
20 English
your unique communication needs.
Roger Beep Mode
In Roger Beep mode, your listener will hear an audible tone when you release the Talk button. This alerts your listener that you are finished talking and it is OK for them to speak.
To Set Roger Beep On or Off:
1.Display will show ROG icon and ON or OFF flashing.
2.Press Channel Up/Down button to select ON or OFF. ROG will be displayed when On.
3.Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming.
Key Tone Mode
In Key Tone mode, an audible tone will sound each time a button is pressed or you change a setting.
To Set Key Tone On or Off:
1.Display will show Key Tone icon and ON or OFF flashing.
2.Press Channel Up/Down button to select ON or OFF.
3.Press Call/Enter/Setup button to save entry.
ATIS Mode
ATIS mode allows control over ATIS packet transmissions. This mode is only visable after initial ATIS
To Set ATIS On or Off:
1.Display will show ATIS icon and ON or OFF flashing.
2.Press Channel Up/Down button to select ON or OFF.
3.Press Call/Enter/Setup button to save entry.
You have now ended Marine (VHF) Setup mode programming and will enter Marine Standby mode.
NOTE: Scan and
Channel Down and SCAN Buttons
ATIS ID Start Screen
Channel Up/Down Button
ATIS ID Number Entry
To Set the ATIS ID Number:
NOTE
The ATIS ID is a 10 digit number that will always begin with the number “9.” You will be asked to enter only the last nine digits. The first digit, “9”, has been automatically entered for you.
1.With the radio turned Off; press and hold the
Channel Down and SCAN buttons and simultaneously power On the radio.
2.The LCD will display and flash the ATIS icon. A dash
NOTICE
Remember, you only have one (1) attempt to set the ATIS ID number. Once this number has been entered, only your Cobra distributor can reset the ATIS ID number. You can also return the radio to Cobra for reprogramming.
3.Press the Channel Up/Down button to scroll through the specific ATIS digit being entered.
4.Pressing the Call/Enter/Setup button advances to the right, one (1) digit, for the next entry.
5.Repeat this input sequence until all nine digits have been entered. The ATIS icon will stop flashing when a successful ATIS ID entry has been made.
6.Press the Call/Enter/Setup button again, after all numbers have been entered, to save the ATIS ID number and return to the Marine Standby mode.
Nothing Comes Close to a Cobra® 21
