Included in this Package | Cobra Electronics MR HH330 FLT EU

Included in this Package

Installation

Included in this Package

•

You should find all of the following items in the package with your CobraMarine VHF radio:

Radio

Wrist Strap

Drop-In Battery Charger

Wrist Strap and Belt Clip

Installation

Wrist Strap and Belt Clip

•

Wrist Strap

Wrist Strap

The radio comes with the wrist strap already attached.

It can be easily removed if you choose not to use it.

Belt Clip

Battery Charger Power Cord

LiON Battery Pack

Belt Clip Secured to Belt

Insert Knob onto Belt Clip

Use the spring-loaded belt clip to carry the radio on your person.

1.Press open the belt clip, slide it over the belt and release the clip.

2.Insert the round guide on the back of the radio into the guide channel on the back of the belt clip. The radio must be upside-down, as shown, to remove it from the belt clip.

3.Once the knob is inserted all the way into the belt clip channel, the radio swings free but remains secure.

For connection to 12-volt and AC power sources.

Operating Instruction Manual

Spring-Loaded Belt Clip

6 English

Secure Radio

Nothing Comes Close to a Cobra® 7

Image 6

Cobra Electronics MR HH330 FLT EU owner manual Included in this Package, Wrist Strap and Belt Clip

Contents

For Warranty, Product Service Accessory Information Our Thanks to You Customer AssistanceCustomer Assistance Product Features Radio Controls IndicatorsBacklit LCD Screen Product Features Backlit LCD Liquid Crystal Display Screen Table of Contents Important Safety Information General PrecautionsImportant Safety Information Recommendations for Marine Communication Licensing Information Wrist Strap Included in this PackageWrist Strap and Belt Clip Belt Clip Initial Charge Installing the Battery PackBatteries and Charger Batteries and Charger To Remove Battery Pack from Radio Maintaining the Battery ChargeAlkaline Batteries Getting Started Getting StartedCommon Radio Functions Radio Speaker and Microphone Key Lock Backlight/Key Lock ButtonTo Display the Backlight Momentarily Channel Up/Down Buttons High/Medium/Low H-M-L Power Button Setup Mode ProgrammingSetup Mode Programming To Toggle Between H-M-L Power Modes International/Canada/USA Channel Maps Squelch ControlTo Set Squelch Control To Set Channel Map Operating Area Atis ID Programming Atis ID Programming Tri-Watch Mode Marine Standby and Receive Rx ModeChannel 16 Mode Standby/Receive Transmit Press Channel Up/Down button to select the desired Memory Location ModeTri-Watch mode Using Tri-Watch Tri-Watch Scan Mode Tri-Watch channel To Recall a Stored Memory Location Channel Scan ModeTo Exit Memory Location Mode To Erase Stored Memory Locations Burp Feature Floating FeatureMemory Location Scan Mode Floating Radio Maintenance and Troubleshooting VHF Marine Radio Procedures Voice Calling Emergency Messages and Distress ProcedureVoice Calling Radiotelephone Calls Marine Distress Procedure Emergency Messages Distress ProcedureMarine Emergency Signals If You Hear a Distress Call Specifications Emergency Messages and Distress ProcedureSpecifications Frequency Range Tx 156.025 to 157.425 MHz RF Output Power Accessories VHF Marine Channel Assignments 04A 01A03A 05A 20A 18A19A 21A 65A 63A64A 66A 82A 80A81A 83A Declaration of Conformity and CE Markings Declaration of ConformityCE Marking