EasySet Programming
Your Detector
EasySet Programming
•
All user mode settings on your detector can be changed by using Program mode. When changing the settings, please keep in mind:
■Buttons can have multiple functions.
■All settings will be stored in memory when the power is turned off and recalled when the power is turned back on.
The procedure for using Program mode is shown on page 7.
NOTE
You cannot enter Program mode during an alert. The unit will not detect signals while in Program mode. During programming, if no buttons are pushed for ten (10) seconds, the unit will automatically exit Program mode and save the last settings.
Programming User Modes
The tables on pages 8 through 9 show you how to program all user modes and the settings you can choose from.
NOTE
On the following pages, you will find more detailed explanations of each setting.
See page 14 for instructions on setting the IntelliMute activation point. See page 16 for instructions on calibrating the compass.
See page 21 for instructions on using SmartPower.
6English
EasySet Programming
Your Detector
Set/City Button |
|
|
|
|
Press and release |
|
|
|
|
Select/Dim Button |
|
|
| |
Press and release |
|
|
| |
Program/Mute Button |
|
|
| |
Press and hold/Press and release |
|
|
| |
|
|
|
|
|
To Use Program Mode |
|
|
|
|
|
|
|
|
|
Press and hold the | Tone | Visual Display |
|
|
Program/Mute button | Three (3) beeps | Program will appear. |
| |
for two (2) seconds. |
| |||
|
|
|
| |
|
| PROGRAM |
|
|
|
| Then brief programming |
| |
|
| instructions will scroll through |
| |
|
| the display three (3) times. |
| |
|
|
|
| |
While the programming | One (1) beep with | As each mode is displayed, |
| |
instructions are | each button press | the current setting for that |
| |
scrolling, press and |
| mode will be shown. |
| |
release the Select/Dim |
|
|
|
|
button to cycle through |
|
|
|
|
the user modes. |
|
|
|
|
|
|
|
| |
With the user mode you | One (1) or two (2) | The setting you select will |
| |
wish to change displayed, | beeps, depending on | be shown. |
|
|
press and release the | your selection |
|
|
|
Set/City button to |
|
|
|
|
change the setting. |
|
|
|
|
To move to the next |
|
|
|
|
selection, press the |
|
|
|
|
Select/Dim button again. |
|
|
|
|
|
|
|
| |
When you have finished | One (1) beep | When you exit Program |
| |
programming any or |
| mode, the new setting will |
| |
all of the user modes, |
| automatically be saved and |
| |
press and release the |
| EXIT PROGRAM and Settings |
| |
Program/Mute button |
| Saved! will appear in the display. |
| |
to exit Program mode. |
| EXIT | Settings |
|
Or simply wait ten (10) |
|
| ||
|
|
|
| |
seconds without |
| PROGRAM | Saved! |
|
pushing any buttons. |
|
| ||
|
|
|
| |
|
|
|
| |
|
| Nothing comes close to a Cobra® 7 | ||
