Cobra Electronics XRS 9600 operating instructions Mode Tone, Result

Nothing comes close to a Cobra®

EasySet Programming

Your Detector

This EasySet programming menu lists all of the modes and settings you can choose from after you have entered Program mode as described on page 7.

EasySet Programming Menu

Mode	Tone	Visual Setting	Result
Set City	Two (2) beeps	City X	A single beep sounds when the
mode			signal is first detected.
default*
	One (1) beep	City X	Audio for all X band alerts are blocked
		beep Off	until signal strength reaches Level 3.
	One (1) beep	City X+K	Combines the City X mode with
			prevention of K band audio alerts
			until signal strength reaches Level 2.
IntelliMute	Two (2) beeps	IntelliMute On	All alerts (except for strobe signals
mode			from emergency vehicles) are
			automatically muted below the
			engine rev point you set.
	One (1) beep	IntelliMute Off	Normal operation.
Set IntelliMute	One (1) beep	Set IntelliMute	Allows you to set the engine
RPMs		(see page 14	rev point while using IntelliMute.
(not shown		to set activation
if IntelliMute		point)
is off)
AutoMute	Two (2) beeps	AutoMute On	The audio volume of all alerts will be
mode			automatically muted after four (4) seconds
			for as long as the signal is detected.
	One (1) beep	AutoMute Off	All alerts will sound at full volume
			for as long as the signal is detected.
Set compass	One (1) beep	Set Compass	Allows you to calibrate the compass.
		(see page 16
		to calibrate
		compass)
Pop Detect	Two (2) beeps	Pop Detect On	The unit will detect Pop signals.
mode
	One (1) beep	Pop Detect Off	The unit not will detect Pop signals.

8English

EasySet Programming

Your Detector

EasySet Programming Menu

Mode	Tone	Visual Setting	Result
VG-2 Detect	Two (2) beeps	VG-2 Detect On	The unit will detect VG-2 signals.
mode
	One (1) beep	VG-2 Detect Off	The unit will not detect VG-2 signals.
VG-2 Audio	Two (2) beeps	VG-2 Audio On	With VG-2 Detect on, the unit will give
mode (not			audible alerts for VG-2 signals.
shown if VG-2
	One (1) beep	VG-2 Audio Off	With VG-2 Detect off, the unit will give
detect is off)
			only visual alerts for VG-2 signals.
Spectre 1	Two (2) beeps	Spectre 1	The unit will detect Spectre 1 signals.
Detect mode		Detect On
	One (1) beep	Spectre 1	The unit will not detect Spectre 1 signals.
		Detect Off
Spectre 1	Two (2) beeps	Spectre 1	With Spectre 1 Detect on, the unit will
Audio mode		Audio On	give audible alerts for Spectre 1 signals.
(not shown if
	One (1) beep	Spectre 1	With Spectre 1 Detect off, the unit will give
Spectre 1
		Audio Off	only visual alerts for Spectre 1 signals.
detect is off)
SmartPower	Two (2) beeps	SmartPower	SmartPower is on.
mode		On
	One (1) beep	SmartPower	SmartPower is off.
		Off
X Band detect	Two (2) beeps	X Band On	The unit will detect X Band signals.
mode
	One (1) beep	X Band Off	The unit will not detect X Band signals.
Set display	Two (2) beeps	Display Dim	Partially dimmed for dusk or night driving.
Dim mode
	One (1) beep	Display	More dimmed for dusk or night
default*
		Dimmer	driving.
	One (1) beep	Display Dark	Display is off.
Restore	One (1) beep	Restore	Resets user modes and settings to
factory		Factory	factory default.
settings		Settings
Exit program	One (1) beep	EXIT	Allows you to exit Program mode.
		PROGRAM

* The settings for these user modes can also be changed with the one (1) button method. See description of each user mode (pages 10 and 23) for details.

9