Settings
Your Detector
Muting An Alert
Your detector allows you to quickly turn off an Audio Alert by momentarily pressing the Program/Mute button. If you press the Program/Mute button a second time during the Alert, the Audio Alert will be turned back on.
Program/Mute Button 
Press and release
To Turn Turn Off Or On An Audio Alert Using The Program/Mute Button
Press and release | Tone | Visual Display | |
the Program/Mute |
|
| |
None | None | ||
button. | |||
|
| ||
|
|
|
Auto Mute Mode
Auto Mute will automatically reduce the audio volume of all alerts after four (4) seconds for as long as the signal is detected. The factory setting for Auto Mute is on.
To Turn Auto Mute Off Or On Using Program Mode
(See Page 7 For Instructions On Using Program Mode)
| In Program mode, |
| Tone | Visual Display |
| go to Auto Mute. |
|
|
|
|
| One (1) beep | Auto Mute Off | |
|
|
| ||
|
|
|
|
|
|
|
| Two (2) beeps | Auto Mute On |
|
|
|
|
|
|
|
| Auto Mute Off | Auto Mute On |
|
|
| ||
|
|
| AutoMute | AutoMute |
|
|
| Off | On |
Settings
Your Detector
IntelliMute
IntelliMute is a unique new feature that allows you to avoid alerts you don’t need to hear because you are stopped or moving slowly. By sensing the “revs” (RPMs) of your engine, IntelliMute knows when you are at low speed and automatically mutes alerts (except for strobe signals from emergency vehicles).
Before IntelliMute will work, you must set an activation point for your engine’s revs (see page 14). Whenever the revs are below that point, IntelliMute will begin muting. The activation point will be stored in memory and recalled each time the power is turned on. An i will appear in the display when IntelliMute is on. The factory setting is IntelliMute off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense the engine’s revs. In such cases, you can reduce unwanted audio alerts by using Auto Mute and City mode when appropriate.
To Turn IntelliMute On Or Off Using Program Mode (See Page 7 For Instructions On Using Program Mode)
| In Program mode, | Tone | Visual Display | ||
| go to IntelliMute. |
|
|
| |
|
| Two (2) beeps | IntelliMute On, | ||
|
|
|
| ||
|
|
|
|
| then i appears in the display |
|
|
|
|
|
|
|
|
|
| One (1) beep | IntelliMute Off |
|
|
|
|
|
|
IntelliMute On | IntelliMute Off |
N W | i h Intelli |
Intelli | Mute |
Auxiliary Audio Jack
The Auxiliary Audio Jack can be used to connect an external speaker in environments with high ambient noise levels. The internal speaker will be disconnected.
Auxiliary 
Audio Jack
Mute | Off |
On |
|
12 English
Nothing comes close to a Cobra® 13 |
