REMOTE CONTROL ATSC DIGITAL FEATURES
DIGITAL TV MODE
The Remote Control contains touchscreen displays for
“DTV” related controls. Use the
remote’s touchscreen buttons to
access and adjust the DPTV for
dedicated ATSC mode features, as
well as perform
alternate audio*
Press to cycle through the available audio language tracks for the current DTV program. (See the additional alternate audio section information shown below.)
power button
Press to turn the DPTV ON and OFF.
status button
Press to see the current channel number on the DPTV screen. Also press to clear the DPTV screen after control adjustments.
dtv freeze
Press to freeze or stop the current picture on the DPTV screen. Program sound will continue to play. Repress the freeze button, or wait for a
mute button
adjustments and select other
program functions.
Press to turn the sound OFF on the DPTV. Press again to return the sound to its previous level.
mute
Note: For battery installation and
other details on the initial use of
the remote control also refer to the
HD6400W Quick Use guide included with your DPTV.
BEGIN
1Gently tap the remote touchscreen with your finger to display its control panel for use.
|
| DTV |
power | status | |
alt audio | freeze | |
sleep | ext input | |
| analog format | |
1/3 | Analog | DTV |
channel scan buttons
channel | Press to scan up (+) or down | |
+ | ||
channel numbers. | ||
|
volume | volume buttons |
+ | Press to adjust the DPTV sound level up (+) and down |
| |
| ext input button |
| Press to select the auxiliary input connections available on |
| the rear of the DPTV (analog NTSC - AUX1/2/3; Monitor |
| |
| DTV |
| number buttons |
Be sure “TV” is selected for the
current device tab item category.
2Press the “DTV” button on the remote to ensure ATSC mode commands are sent from the
remote.
STOP
SMART HELP
Due to the amount of
sleep button
Press to set the DPTV to |
|
|
automatically turn itself OFF. | 2/3 Analog | DTV |
(15 minutes to 2 hours ahead.) |
|
|
A/CH button
Press Alternate Channel (A/CH) to select previously viewed channels. Enter the desired two channel numbers (from the remote’s number buttons), and then press A/CH to toggle back and forth between the two channel selections.
| Press two number buttons to select single digit “major” | |||
| DTV channels. Use a | |||
| ATSC system | |||
| “0, 6, 0, 1” for | |||
| HD6400W Quick Use guide for details on the use and | |||
A/CH | selection of |
| ||
|
| DTV | menu | buttons |
|
|
| ||
menu |
|
| Press the Menu (or ok) button to | |
|
|
| show | |
|
|
| ▲ or ▼ buttons to move up (or | |
| ok |
| down) the list of DTV controls. | |
|
|
| Press the (M) ◀ or ▶ buttons to | |
make adjustments to the selected
exit | controls. |
|
optional component and
feature uses available with the
remote’s Device Reference and
Learn Code lists, please also refer
to the separate
Control Owner’s Manual for
complete details on its function
and operations.
3/3 Analog | DTV |
exit button
Press to clear the DPTV screen after control adjustments. Also press to see the current channel number on the DPTV screen.
scroll arrows
Press to move to the next (or previous) page of remote controls. The touchscreen will display the current control screen’s page number, and the total number of pages available for the selected device (1/3; 2/3; etc.)
Alternate Audio preference: English
*The “alt(ernate) audio” button on the remote allows the user to select a language preference for multilingual or alternate language audio track programs that may be received for DTV viewing. (English is the default language setting.)
When digital broadcast material is received which contains multiple language soundtracks the DPTV will identify, find, and then select the preferred alternate audio language for sound playback. If the selected language preference is not available within the received program material, the default audio language is then selected.
52
