NTSC/ANALOG FEATURE MENU CONTROLS
CHANNEL MEMORY
AUTO-PROGRAMMING
Your DPTV can automatically set
itself for local area (or Cable TV)
channels. This makes it easy for you to select only the TV stations in your
area when the CHANNEL ▲▼ buttons are pressed.
NOTE: If you went through First
Time Setup (see page 6), this task has
already been completed for you.
BEGIN
1Select CHANNEL MEMORY (START AUTO-PROGRAMMING) control.
With the FEATURES MENU on- screen, move the RED highlight with
the MENU 
buttons. Then press the MENU button.
2Press the MENU ▲▼ buttons to select the START AUTO- PROGRAMMING option, then press the Menu button to begin.
The TV shows which channel
numbers are "SAVED" (✔) as they
are added into memory.
MEMORY is finished" shows when the DPTV is through adding channels.
3Press the “exit” (or Menu) button to clear the screen.
STOP
SMART HELP
Try it out. Press the
CHANNEL▲▼ buttons
and see which channels you can
select.
Remember, an Antenna or Cable
signal must first be connected to
your DPTV so that channels can
be saved.
If you want to delete any
unwanted channels from the
DPTV's memory, see
"ADD/DELETE CHANNELS" on
the next page.
NTSC
ANALOG MAIN MENU
PICTURESOUND
FEATURES 
1ST TIME SETUP | EXIT |
2
mute
1
2
menu
volume
+
ok
exit |
| 1 |
4/4 Analog | DTV |
3
✔ Channel Numbers are Saved in Memory
FEATURE MENU |
|
SMART | CABLE |
PICTURE | TUNING |
CLOSED | CHANNEL |
CAPTIONS | MEMORY |
EXIT | MORE... |
| 1 OF 3 |
CHANNEL MEMORY
ADD/DELETE
CHANNELS
START
EXIT
CHANNEL MEMORY
1 | 2 | 3 | 4 |
5
6
7
8
9
1O 11 12
13 14 15 16
17 18 19 20
21 22 23 24
Press "M" to
Stop
14
