Philips HD6400W manual RED/BLUE Convergence, Select Convergence control, This section

NTSC/ANALOG PICTURE MENU CONTROLS

RED/BLUE CONVERGENCE

Convergence is the correct

lining up of the red and blue light paths on the DPTV screen.

NOTE: If no color fringing (see

Smart Help) shows, then no Convergence adjustments are

necessary.

BEGIN

1Select CONVERGENCE control.

With PICTURE MENU (2 of 2) on-screen, move the RED highlight

with the MENU buttons. Then

press the MENU button.

NTSC

ANALOG MAIN MENU

PICTURE	SOUND
FEATURES
1ST TIME SETUP	EXIT

PICTURE MENU

COLOR

BRIGHT

SHARP

EXIT

TINT

PICTURE

CLEARVIEW

MORE... 1 OF 2

2Press the MENU ▲▼ buttons to select either the Red or Blue Convergence control, press the MENU button to continue.

3Press the MENU buttons to move the selected red (or blue) convergence cross directly over the white cross on the DPTV screen.

The red (or blue) cross is properly

adjusted when it is completely merged with the white cross. (No

color appears around the edge of

the white cross).

4Press the “exit” button to clear the screen when convergence adjustments are complete.

STOP

2
1			2
menu
		ok
	exit
3/3	Analog	DTV	1
4

mute

volume

+

2

3

PICTURE MENU

CONVERGENCE

VIDEO ENHANCEMENT

EXIT	MORE...
	2 OF 2

CONVERGENCE MENU ALIGN RED

ALIGN BLUE

CONVERGE MULTI POINT BACK

SMART HELP

Remember, Convergence

has been set at the factory for

best viewing, but if one or more of

the (red or blue) colors appear

around the edges of objects (color

fringing) follow the steps given in

PRESS TO ALIGN RED

PRESS MENU TO RETURN

this section.

NOTE: Adjustments for “Multi-Point” on- screen color fringing can also be made as part of the DPTV’s Convergence control system. Follow the on screen menu directions to select individual screen areas that can be readjusted and set for varying red/blue color fringing conditions. These multi-point settings can then be “Saved” to memory for the specific areas of the DPTV screen (or Factory Settings for convergence can be recalled and put back into place for use).

MULTI-POINT CONVERGENCE CONTROLS

CONVERGENCE MULTI POINT
CONVERGE RED POINTS
CONVERGE BLUE POINTS
RESTORE FACTORY SETTINGS
SAVE ADJUSTMENTS
BACK	CONVERGE RED POINTS
	USE	TO ADJUST
	DIGIT 2, 4, 6, 8 TO MOVE CURSOR
	MENU TO RETURN
	PRESS MENU NOW TO CONTINUE

9