Philips HD6400W manual RED/BLUE Convergence, Select the Atsc Convergence control

ATSC/DIGITAL PICTURE MENU CONTROLS

RED/BLUE CONVERGENCE

Convergence is the correct

lining up of the red and blue

light paths on the DPTV screen. NOTE: If no color fringing (see

Smart Help) shows, then no

Convergence adjustments are necessary.

BEGIN

1Select the ATSC Convergence control.

With Picture Menu on-screen,

move the highlight with the

MENU ▲▼ buttons. Then press the MENU (or ok) button.

2Press the MENU ▲▼ buttons to select either the Align Red or Align Blue Convergence control, press the MENU button to continue.

3Press the MENU buttons to move the selected red (or blue) convergence cross directly over the white cross on the DPTV screen.

The red (or blue) cross is properly adjusted when it is completely merged with the white cross. (No

color appears around the edge of the white cross).

4Press the “exit” button to clear the screen when convergence adjustments are complete.

STOP

ATSC

DTV Main Menu

Picture

Sound

Speakers

Features

Tuning Program

DTV Setup

Exit

2
1			mute
			channel
		DTV	+
menu
			volume
			+
		ok
	exit
3/3	Analog	DTV	1	2
					3
4

Picture Menu

Color

Brightness

Sharpness

Picture

Tint

Convergence

Back

CONVERGENCE MENU ALIGN RED

ALIGN BLUE

CONVERGE MULTI POINT BACK

PRESS to ALIGN RED

Press MENU to Return

SMART HELP

Remember, Convergence

has been set at the factory for

best viewing, but if one or more of

the (red or blue) colors appear

around the edges of objects (color

fringing) follow the steps given in

this section.

NOTE: Adjustments for “Multi-Point” on- screen color fringing can also be made as part of the DPTV’s Convergence control system. Follow the on screen menu directions to select individual screen areas that can be readjusted and set for varying red/blue color fringing conditions. These multi-point settings can then be “Saved” to memory for the specific areas of the DPTV screen (or Factory Settings for convergence can be recalled and put back into place for use).

MULTI-POINT CONVERGENCE CONTROLS

CONVERGENCE MULTI POINT
CONVERGE RED POINTS
CONVERGE BLUE POINTS
RESTORE FACTORY SETTINGS
SAVE ADJUSTMENTS
BACK	CONVERGE RED POINTS
	USE	TO ADJUST
	DIGIT 2, 4, 6, 8 TO MOVE CURSOR
	MENU TO RETURN
	PRESS MENU NOW TO CONTINUE

37