S E T U P
Performing the Self Test
The self test checks the printer’s overall operability. Refer to the figures and instructions below to perform the printer self test.
Figure 3-8. Performing the Printer Self Test
IMPORTANT!
The printer should be loaded with media, connected to AC power, and turned off.
1.Press and hold the FEED button.
2.Turn the printer ON while holding the FEED button.
3.Release the FEED button when the self test starts to print.
4.Turn the printer off and then on again to return to normal printing operation.
IMPORTANT!
After performing the self test, the printer is in hexadecimal dump mode and cannot print normally until you cycle the power.
Copyright © 2004, Cognitive. | 15 |
