Cognitive Solutions Advantage RFID Thermal Printer manual Rfid Ledflsh ON/OFF/ACCUM, Accum

		P R O G R A M M I N G
!RFID LEDFLSH
Function	Controls the transmission of a ‘Success’ or ‘Failure’
	indication to the LED display during and at the
	very end of any CPL-RFID command’s execution.
Explicit Form	!RFID LEDFLSH ON/OFF/ACCUM
Parameters	ON	Flashes LED (Green for Success) or (Red
		for Failure) after any CPL-RFID
		command completion
	OFF	Does NOT flash any LED after CPL-
		RFID command completions. The LED
		normally remains OFF during a label-
		format execution until the printer is
		ready for the next label or command
		where LED is set Green
	ACCUM	Does NOT flash any LED until after the
		entire label- format has completed
		execution. If all CPL- RFID commands
		completed successfully, the LED is
		flashed GREEN and OFF three times.
		If any CPL-RFID command failed, the
		LED is flashed RED and OFF three
		times.
Response	No specific response
Command Type	RFID Setup/Debug Command
Example	To Printer:
	!RFID LEDFLSH OFF

NOTE: All CPL-RFID Configuration-Setup Commands are processed outside the context of a standard CPL Label-Format (i.e. CPL beginning with a header-line ‘! 0 100 nnn 1’ and ending with ‘END’). Attempts to use CPL-RFID Configuration-Setup Commands within a Label-Format result are ignored without indication.

Copyright © 2004, Cognitive. 55