■Assemble pole assembly by inter- locking
■Thread pole assembly into bottom collar. (Fig. 7)
Fig. 7 |
■Mount stake securely into ground.
■Place pole assembly into stake. (Fig. 8)
Fig. 8 |
DANGER
•EXPLOSION - FIRE HAZARD
•Propane is heavier than air and can accumu- late in low places. If you smell gas, leave the area immediately.
•Always attach or detach propane source out- doors; never while torch is lighted, near flame, pilot lights, other ignition sources or while torch is hot to touch.
•Always light & use torch outdoors.
•This torch must not be exposed to flammable vapors or liquids during lighting.
•This torch is very hot during use and can ignite flammables too close to the torch. Keep flammables at least 72 inches from the sides and 72 inches from the top of the torch. Keep gasoline and other flammable liquids and vapors well away from torch.
To Light Torch
■For models with a globe, place globe in the center of holding clips. (Fig. 9)
■For models with a plastic cap, remove plastic cap from torch. (Fig. 10)
Fig. 10 |
■For models with a soft bag, remove soft bag from torch.
(Fig. 11)
Fig. 11 |
CAUTION
•The post assembly must be set up in a vertical position for the propane torch to function properly.
To Light
WARNING
If you smell gas:
1.Do not attempt to light appliance.
2.Extinguish any open flame.
3.Disconnect from fuel supply.
4.Call
■Place lighted match near burner and open fuel valve fully. (Fig. 12)
Fig. 12 |
WARNING |
•BURN HAZARD
•Never leave torch unattended when hot or in use.
•Keep out of reach of children.
