CD-ROM, CD-RW, or DVD-ROM Drive (3200 Series)

Note: Your computer must be turned on before you can insert or remove a disc.

To insert a CD into an optical drive, follow these steps:

1.Press the Load/Eject 1 button to open the drive door.

2.Carefully lift the disc from the CD case by holding the disc only by the edges to avoid touching the surface.

3.Place the disc into

the round area of the slot, label side

facing upward for the desktop configuration. If

you have chosen the upright

configuration, place the disc with the label facing outward. If the tray contains support tabs, carefully slide the disc under the tabs to correctly position it in the tray.

4. Press the Load/Eject 1 button to close the drive door.

MY PRESARIO—GETTING STARTED

USING YOUR COMPUTER 4-15

Page 46
Image 46
Compaq 233789-371 manual CD-ROM, CD-RW, or DVD-ROM Drive 3200 Series, Press the Load/Eject 1 button to open the drive door