Presario 305 Model
Before You Begin |
| Specifications |
|
|
|
|
|
|
Removal Sequence |
| Troubleshooting |
|
|
|
|
|
|
Product Description |
| Pin Assignments |
|
|
|
Removing the PC Card Assembly
Removal
Sequence
Serial Number
Location
Preparing for
Disassembly
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Expansion
Unit
Battery Pack
Hard Drive
Modem Card
RTC Battery
Keyboard
Memory Board 
Switch Cover
Display Panel
Deck
Voltage
Converter
Board
Modem
Connector
Board
PC Card
PC Card
Assembly
System Board 
Parts Catalog
Battery Operations
Index
1.Remove the modem card.
2.Remove
the keyboard.
3.Remove the switch cover.
4.Remove the display.
5.Remove the deck.
6.Remove the modem connector board.
7.Remove the two silver (t8) screws on the left side of the PC card assembly.
8.Remove the black (t8) screw that secures the front of the PC card assembly to the base assembly.
9.Lift up on the left side of the PC card assembly to disconnect the assembly from the system board.
Be sure to route the audio and light board cables between the PC
NOTE: card assembly and the base plastic. Do not route near the heat sink.
