Presario 305 Model

Before You Begin

 

Specifications

 

Parts Catalog

 

 

 

 

 

 

 

 

 

 

Removal Sequence

 

Troubleshooting

 

Battery Operations

 

 

 

 

 

 

 

 

 

Index

Product Description

 

Pin Assignments

 

 

 

 

 

 

Power-On Self Test (POST)

Running POST

The Power-On Self Test (POST) is a series of tests that run every time the computer is turned on. POST verifies that the system is configured and functioning properly.

To run POST, complete the following steps:

1.Complete the Preliminary steps.

2.Turn on the computer.

If POST does not detect any errors, the computer beeps once or twice to indicate that POST has run successfully, and the computer boots from the hard drive (or from a bootable diskette if one is installed in the diskette drive).

If POST detects an error, it is indicated by screen and/or audible messages. Refer to the following tables for a list of POST codes and their relevant descriptions. If there is more than one recommended action, only try the later actions in the list if the first action recommended does not solve the problem.

If the system is not functioning well enough to run POST, or if the NOTE: display is not functioning well enough to show POST error messages,

refer to the Troubleshooting tables.

102

System board failure

162

System options not set

XX000YZZ 201

Memory Error

301

Keyboard Error

304

Keyboard or System Unit Error

601

Diskette Controller Error

605

Diskette Drive Error

1780

Primary Hard Drive 0 Failure

1782

Hard Drive Controller

Power-On Self-Test Messages

102-System Board Failure

Probable Cause

Recommended Action

DMA, timers, etc.

Replace the system board.

162-System Options Not Set

Probable Cause

Recommended Action

Configuration incorrect

Run Computer Setup.

CMOS reflects that an invalid

Run Computer Setup.

configuration has been set.

 

 

XX000YZZ 201-Memory Error

Probable cause

Recommended action

RAM failure

1. Replace the memory module.

2.Replace the system board.

Memory test data error

1.

Replace the memory module.

 

2.

Replace the system board.

XX000YZZ RAM failure

Replace the system board.

301-Keyboard Error

Probable Cause Recommended Action

Keyboard failure 1. Ensure the keys are not depressed during POST.

2.Reconnect the keyboard with the computer off.

3.Replace the keyboard.

304-Keyboard or System Unit Error

Probable

Cause

Keyboard or system board error

Recommended Action

1.Replace the keyboard.

2.Replace the TouchPad or mouse.

3.Replace the system board.

601-Diskette Controller Error

Probable Cause

Mismatch in drive type or failure in the diskette controller

Recommended Action

1.Run Computer Checkup (TEST).

2.Check and/or replace cables.

3.Replace the system board.

605-Diskette Drive Error

Probable Cause

Recommended

Action

 

Mismatch in drive type Run Computer Setup.

1780-Primary Hard Drive 0 Failure

Probable Cause

Recommended Action

Disk 0 failed to respond

1. Run Computer Checkup (TEST).

2.Replace the hard drive.

Hard drive format error 1. Run Computer Checkup (TEST).

2.Replace the hard drive.

1782-Hard Drive Controller

Probable Cause

Hard drive controller failure

Recommended Action

1.Run Computer Setup.

2.Replace the hard drive.

Page 58
Image 58
Compaq 305 specifications Power-On Self Test Post, Running Post