Compaq 5030 manual Removing the Monitor Base

Product Features

The DVI-D connector on this monitor uses digital video information to provide higher speed for higher display resolution. The results are more precise video displays without manually adjusting screen display quality.

Signal Cables Included:

■VGA (Analog) to VGA Connector (15 pin)

■DVI-D Cable (Digital only) to DVI Digital Connector

Removing the Monitor Base

Before you can mount the monitor onto a swing arm or other mounting fixture, you must remove the monitor from the base.

CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected.

To remove the monitor from the base, complete the following steps:

1.Lay the front bezel down on a soft area to prevent it from getting scratched, defaced, or broken.

Compaq TFT5030 Flat Panel Monitor User’s Guide 9