Compaq 5030 manual Adjusting Screen Quality

Product Features

8.Press the Minus or Plus buttons to adjust the minutes.

9.Press the Menu button to lock in the time chosen.

10.After setting the current time, the highlight automatically skips to Set Sleep Time "hours." Repeat steps 6 through 9 to set Sleep Time.

11.If you do not want to set Sleep Time, press the Menu button twice, then select Save and Return to exit the menu.

12.After setting Sleep Time, the highlight automatically skips to Set On Time "hours." Repeat steps 6 through 9 to set On Time.

13.Set the Timer mode to On to activate the Sleep Timer settings.

14.When you are finished, select Save and Return to exit the menu.

The fifth selection Sleep Now turns the monitor backlights off immediately and stays in sleep mode until the next On Time activates or a monitor button is pressed.

Adjusting Screen Quality

Allow the monitor to warm up for 20 minutes before performing the following procedures.

The Auto Adjustment feature in the OSD automatically fine-tunes the image quality each time a new video mode is utilized. If additional improvement is desired, select "Auto Adjust" in the Basic Menu.

For more precise adjustments, use the Compaq LCD Display Assistant utility included on the CD-ROM. This utility graphically illustrates how to adjust the Clock and Clock Phase controls explained in the Optimizing Digital Conversion section below.

Compaq TFT5030 Flat Panel Monitor User’s Guide 19