When you touch FAX on the control-panel display, the following screen appears.
4
12
3
985
6
7
1 Fax recipients list
2 One-touch speed-dial buttons
3Configure button
4Speed Dial button
5Remove button
6Notify button
7Settings button
8Next Number button
9Phone Book button
Follow these instructions to send a fax.
1. Place the document face-up in the ADF or face-down on the scanner glass.
2. Touch FAX on the control panel.
3. Use the control-panel keypad to type the fax number(s) to which you want to send the
document, or use one of the one-touch buttons (see the following section for instructions
on setting up the the one-touch buttons).
NOTE If you are sending to more than one fax number, touch Next Number to move down to a
new line and type the next number.
4. Touch Start to send the fax. Status messages show the progress of the fax operation.
NOTE If the system administrator has enabled billing codes, you might be prompted for a billing
code after you touch Start. The fax is not sent until the billing code has been typed.
ENWW Sending documents 23