Compaq C240, C180, C200, C360, C160 manual 197

The Boot Console Interface

Displaying the Current Memory Configuration

Memory Information Sample 2

The following sample shows the memory information when memory mod- ules are not properly installed and configured. In this sample the memory module in memory slot 1A is missing.

MEMORY INFORMATION

WARNING: Memory has been reconfigured due to a physical change or because the Page Deallocation Table (PDT) was cleared. This is for information only. No action is required.

MEMORY STATUS TABLE

Slot	Size(a+b)	Status
----	---------	------
0a/b	64MB	Configured
1a/b	??MB	SIMM not seated properly.
2a/b	128MB	Configured
	---------
TOTAL	192MB
DETAILED MEMORY CONFIGURATION TABLE
SPA	GROUP	SMC SMC Status	Bank Bank Status Size Slot

-------- --- ---------- ---- ----------- ---- ----

0x00000000	0	0	Configured	1	Configured	64MB	2a/b
		0	Configured	3	Configured	64MB	0a/b
		1	Configured	1	Configured	64MB	2a/b

Group	0 interleaved	2	ways over 3 banks
BAD MEMORY TABLE
SMC	SMC Status	Bank		Bank Status	SIMM Size	Slot
---	----------	----		-----------	---------	----
0	Present	0		Not Present	0MB	5a/b
		2		Not Present	0MB	4a/b
1	Present	0		Not Present	0MB	5a/b
		2		Not Present	0MB	4a/b
		3		Not Present	0MB	0a/b
2	Present	0		Sizing Error	0MB	1a/b
		1		Not Present	0MB	3a/b
		2		Sizing Error	0MB	1a/b
		3		Not Present	0MB	3a/b

Active, installed memory (bytes)		:	201326592	of Standard DRAM
Deallocated pages (bytes)		-	0
			-----------
Available Memory (bytes)		:	201326592
Good Memory Required by OS (bytes):			0	(Not Set by OS)
Memory
HVERSION	SVERSION
-------- ----------
0x0710	0x0900

197