Compaq C360, C240, C180, C200 Verifying the CD-ROM Drive Operation, Usr/sbin/ioscan -d sdisk Return

Using Your CD-ROM Drive

Operating the CD-ROM Drive

Verifying the CD-ROM Drive Operation

To verify that your workstation can communicate with the CD-ROM drive, follow these steps:

1In a terminal window, enter the following command:

/usr/sbin/ioscan -d sdisk RETURN

After a few moments the ioscan utility lists all of the SCSI I/O devices it could find. The list appears similar to the following:

H/W Path	Class	Description
============================================
	bc
8	bc	I/O Adapter
8/12	ext_bus	GSC built-in Fast/Wide SCSI Interface
8/12.0	target
8/12.0.0	disk	QUANTUM LPS1080WD
8/12.5	target
8/12.5.0	disk	DEC	DSP3210SW
8/12.6	target
8/12.6.0	disk	DEC	DSP3210SW
8/16	ba	Core I/O Adapter
8/16/5	ext_bus	Built-in SCSI
8/16/5.2	target
8/16/5.2.0	disk	TOSHIBA CD-ROM XM-4101TA
8/16/5.4	target
8/16/5.4.0	disk	SEAGATE	ST3600N
8/16/5.6	target
8/16/5.6.0	disk	MICROP	2112
10	bc	I/O Adapter
10/12	ext_bus	GSC add-on Fast/Wide SCSI Interface
10/12.4	target
10/12.4.0	disk	SEAGATE ST31200W

If ioscan does not see your CD-ROM drive it returns the following message:

ioscan: No hardware found

If you receive this message, go to Chapter 6, “Solving Problems.”

35