Compaq Memory Channel Hub Attaching the Inner Races to the Tray, Attaching the Inner Slide Races

Installation

2.4.3 Attaching the Inner Races to the Tray

To attach the inner slide races to the tray, refer to Figure 2-3 and proceed as follows:

_________________________ Caution ___________________________

When performing this procedure, ensure that the locking lever is on the outside of the inner slide race. Otherwise, the slide will be damaged when the system is installed on the slide assemblies.

____________________________________________________________

Remove the inner slide race from the right slide assembly and attach the right inner slide race cto the right side of the tray (as viewed from the front) using three 8-32 pan-head screws ö.

õRemove the inner slide race from the left slide assembly and attach the left inner slide race

öto the left side of the tray (as viewed from the front) using three 8-32 pan-head screws

.

Figure 2-3 Attaching the Inner Slide Races
3
2	1

2

LJ-06503.AI7

DIGITAL 2T-CCMHA-CB Central Office Memory Channel Hub Installation/Service Guide 2–9