Installation
2.4.4Mounting the Memory Channel Hub, Front Bezel, and Interlock Actuator Bracket on the Tray
To mount the
_______________________ WARNING __________________________
The
13.6kg (30 lb.). Use sufficient personnel or the proper lifting equipment when lifting or moving the system.
___________________________________________________________
_______________________ ACHTUNG__________________________
Der
___________________________________________________________
1.Turn the
2.Turn the tray c(with inner races attached) upside down and place it on bottom cover of the
3.Align the nine holes in the bottom cover of the
4.Install nine
5.Turn the front bezel úupside down and place flat washers on the five left most studs on the inside of the bezel. A flat washer is not required on the stud behind the indented label area.
6.Align the six studs on the inside of the bezel with the six holes in the front of the tray and push the bezel onto the tray.
7.Secure the front bezel to the tray with six
8.Use two