Powering On the Projector
Follow these instructions to power on the projector:
1.Ensure that the power cord and signal cable are securely connected.
✎Make sure the projector is perpendicular to the projection screen.
2. | Remove the lens cap from the projector by pulling |
| it straight out. |
3. | Turn on the Main power switch on the back of the |
| projector and allow the projector to warm up for one |
| to two minutes. |
✎ When the projector has warmed up, the Compaq startup screen displays, and the LED on the STANDBY button turns green.
MP1400 Microportable Projector |
