Connecting the Projector to a Desktop Computer
1. Rotate the elevator foot to balance the projector.
2. Connect one end of the projector signal cable B to the projector and the other end to the VGA connector on the desktop computer and tighten the screws.
If your computer has a digital connector, connect one end of ✎ the digital flat panel (DFP) signal cable A to the digital
connector on the projector and the other end to the digital connector on the computer. Connect either the VGA cable OR the DFP cable; do not connect both cables.
✎Be sure the signal cable aligns with the connector. Do not force the cable onto the connector or you may damage the signal cable or the projector.
3. Connect one end of the power cord into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector.
4. Turn on the projector first, then turn on the computer.
MP1400 Microportable Projector |
