Compaq MP1400 manual Special On-Screen Messages

■Management—Allows the user to control power saver characteristics of the display, or to view the cumulative lamp hours, reset the lamp hour timer, view the unit’s serial number, or perform a Master Reset.

■Factory Reset—Resets the current operating option to its original factory setting.

Special On-Screen Messages

The following on-screen messages will appear on the projection display to identify the following conditions:

■Check Video Cable— Indicates the video cable may not be plugged into the projector or the selected video input is not accurate.

■Input Signal Out of Range— Indicates the projector is unable to access the appropriate input signal.

■2 Inputs Active - Remove One— The projector has two data inputs: one is an analog D-Sub input, and the other is a digital DFP input. This message indicates that both inputs are active simultaneously and the user should detach one of them.

■Going to Standby— Indicates the projector is entering a sleep mode or is powering off the lamp.

■Lamp May Fail Soon, Replacement Suggested— Indicates the lamp is approaching failure. The message will remain on the screen for five seconds or until the on-screen menu Select button is pressed.

￿￿

MP1400 Microportable Projector 2-7