Compaq manual MP1400 Microportable Projector

When the optional Compaq Multimedia Adapter is attached to the projector, the following messages, in addition to the previous messages, will appear on the projection display to identify the following conditions:

■Analog, Use Source to change input— Indicates Analog and DVI inputs are both connected. Since the projector will default to display Analog, you must use the Source button to switch to DVI.

■DVI, Use Source to change input— Indicates DVI along with other video sources and/or analog sources are present. Analog is the default setting. Use the Source button to switch to DVI.

■Analog, Use PIP for picture-in-picture or use Source to change input— Indicates Analog plus video and DVI are present. Audio is the default setting. Use PIP for picture-in- picture, or change setting using the Source button.

■Composite Video, Use Source to change input— Indicates Composite Video or other inputs present. Default is Composite Video. Use the Source button to change the setting.

■S-Video, Use Source to change input— Indicates S-video with other inputs are active. Use the Source button to change the setting.

￿￿

2-8 MP1400 Microportable Projector