Connecting the Projector to a Compaq PC Companion
To connect the projector to a Compaq PC Companion, the PC Companion must have a male connector adapter and a VGA-out PC Card with a 15-pin connector.
✎The VGA-out PC Card with the 15-pin connector is not included with the Compaq PC Companion. It is sold separately. For information on purchasing this card, call your Compaq authorized dealer, or reseller. To locate a reseller near you, call Compaq at 1- 800-AT-COMPAQ or visit the Compaq web site at http://www.compaq.com/products.
1. Connect one end of the signal cable to the projector and connect the other end to the VGA-out PC Card. The VGA-out PC Card may be inserted into the PC slot on the Compaq PC Companion before or after connecting the signal cable.
2. Connect one end of the power cord into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector.
MP1400 Microportable Projector | 1-9 |
