Compaq Maintenance and Service Guide for Compaq Presario, V6000, 416630-003 manual

Removal and Replacement Procedures

3.Make note of which wireless antenna cable is attached to which antenna clip on the Mini Card module before disconnecting the cables. Then disconnect the cables 1 from the module.

4.Remove the two Phillips PM2.0×3.0 screws 2 that secure the Mini Card module to the computer. (The edge of the module opposite the socket rises away from the computer).

5.Remove the module 3 by pulling it away from the socket at an angle.

✎Mini Card WLAN modules are designed with a notch 4 to prevent incorrect installation into the Mini Card module socket.

Removing a Mini Card Module

Reverse the above procedure to install a Mini Card module.

Maintenance and Service Guide 5–19