Compaq 416630-003, V6000 manual Thermal Pad and Thermal Paste Locations

Removal and Replacement Procedures

✎The thermal pads and thermal paste should be thoroughly cleaned from the surfaces of the fan/heat sink assembly 1, 2, and 3, the system board components 4 and 6, and the processor 5 each time the fan/heat sink assembly is removed. Thermal pads and thermal paste should be installed on all surfaces before the fan/heat sink assembly is reinstalled. Thermal pads and thermal paste are included with all fan/heat sink assembly, system board, and processor spare part kits.

Thermal Pad and Thermal Paste Locations

Reverse the above procedure to install the fan/heat sink assembly.

Maintenance and Service Guide 5–63