Compaq V6000, 416630-003 manual Removing the USB/Power Connector Board

Removal and Replacement Procedures

2.Remove the two Phillips PM2.5×5.0 screws 1 that secure the USB/power connector board to the computer.

3.Release the USB/power connector board 2 as far as the USB/power connector board cable will allow.

4.Disconnect the USB board cable 3 and the power connector board cable 4 from the USB/power connector board.

Removing the USB/Power Connector Board

5. Remove the USB/power connector board.

Reverse the above procedure to install the USB/power connector board.

5–56 Maintenance and Service Guide