Chapter6 - Basic Configuration Guide 27
IPX Protocol
Requiredfor IPX
FrameRelay operationrequires that theWAN interface is set to be a
“numberedinterface.” This means that the interface (and thus the
FrameRelay network)must have an IPX network number.
• IPX numberedint erface
• IPXNetwork Number
CV: Use the IPX Routing: WANDialog Box.
TB:Useconfigure and set the Numberedand Net keywords in the
IPX WAN0 (and/or WAN 1) section.
Suggestedfor IPX
Thes ettingsab ove are all that isg enerally required for IPX operation
over FrameR elay.
•AppleTalkZoneName
CV: Use the AppleTalkRouting: WAN Dialog Box.
TB: Use configure and set the Numbered,NetLower,andDefZone
keywordsin the AppleTalk WAN 0 (and/or WAN 1) section.
CV: Use the DECnet Routing Dialog Box (under Global/DECnet
Routing)and the DECnet: WAN Dialog Box.
TB: Useconfigure and set the Mo de keywordin the DECnet WAN 0
(and/orWAN 1) section.
SMDS Configuration
This sectionco vers thesettin gsrequ iredfor SMDS (Switche d
Multi-megabitData Service) operation of the MicroRouter 1200i WAN
0interface (IP only). SMDS is a connectionless, packet-switched
servicethat offers LAN-to-LAN connectivity across a wide area at up to
1.544 Mbps.
Note: The IP protocolsettings a nd thep hysical communication
settingsare the same as they would be for Frame Relay operation. The
only parameters which should be set differently for SMDS aret heLin k
Configurationand the SMDS addressing section.