Chapter6 - Basic Configuration Guide 23
methodand to select a chat script (once you have created one).
Usethe WAN Chat Scripts Dialog Box (under Global/WANChat
Scripts)to create your chat script.
TB: Use configure and then set the Dialing,DialOutScript,and
DropInactkeywords in the Link Config WAN 1 section. Use
edit config and create a Chat section to contain your dialing
script.
IP Protocol
Requiredfor IP
WANinterfaces which are set for PPP operation do not generally use an
IPaddress. They are set to act as an “unnumberedinterface.” In this
mode of operation, there are no required settings.
Suggestedfor IP
Theseparameters help supply information about the segment to which
theinterface is connected. With this information, routing can take
place.
• SetIP RIP 1, IP RIP 2, or OSPF (Open Shortest Path First)
• IP Static Routes
CV: Usethe TCP/IP Routing: WANDialog Box to set RIP or OSPF,
and theIP Static Routing Dialog Box (under Global/IP Static
Routes)to set staticroutes. To set parameters for OSPF, refer to
the CompatiViewManagement Software Reference Guide.
TB:Useconfigure and set either the RIPVersionkeyword or the
OSPFEnabledkeyword in the IP WAN 0 (and/or WAN 1)
section. Add static routes and a default router using the edit
configIP Static command.
Note: Ifyou set RIP to “on” for a dial-on-demand link, you must
also set the update method to triggered to prevent the link frombeing
broughtup by transmission of RIP information. Youshould only use
triggeredoperation when you are connecting to another Compatible
Systemsrouter at the other end of the link.