34 AppendixC - LED Patterns and Test Switch Settings
OtherIndicators (on All LED Bars)
5,6 flashing: Router stacks starting up
3,4& 7,8 flashing: No OS loaded. Running from ROM.
5,6 on solid, 2 (bars 1 & 3) and 9 (bars 2 & 4) flashing: Erasing OS in
Flash ROM
4,5,6,7on solid, 2 (bars 1 & 3) and 9 (bars 2 & 4) flashing: Erasing
configin Flas h ROM
Scanningfrom 2 to 9 (bars 1 & 3), and scanning from 9 to 2 (bars 2 &
4): Flash ROM erase due to switch setting five or s ix is complete. Set
switchto zero and cycle power.
Note:Anycontinuous flashi ng pattern not noted in this chapter may
becaused by a hardware failure. Pleasecall Compatible Systems Tech-
nicalSupport if your router shows a hardware failure.
MicroRouter 1250i Switch Settings
Caution: Settingsmarked with an asterisk may eraseyour Flas h
ROM. Pleasedo not use these setti ngsw ithout firstcontacting
CompatibleSystems Technical Support.
0 NormalOperation
1Unused*
2Unused*
3 Run Boot ROM Downloader
4Unused*
5 EraseFlash ROM (OS and Configuration)
6 EraseFlash ROM (Configuration Only)
7Unused*
8Unused*
9 Allow letmein password for5 minutes after powerup