IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety pre- cautions should always be taken, including the following:
READ ALL INSTRUCTIONS
BEFORE USING
DANGER — Any appliance is elec- trically live even when the switch is off.
To reduce the risk of death by electric shock:
1.Always unplug immediately after using.
2.Do not place or store appliance where it can fall or be pulled into a tub or sink.
3.Do not place in, or drop into, water or other liquids.
4.If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING — To reduce the risk of burns, electrocution, fire, or injury to persons:
1.Do not overfill steamer as it can cause hot water to boil out.
2.This appliance should not be used near children or by the physically challenged. Unsupervised use could result in fire or personal injury. This appliance is not recom- mended for use by children.
3.Use this appliance only for its intended use as described in this manual. Do not use attach- ments not recommended by the manufacturer.
4.Never operate this appliance if it has a damaged cord or plug, if it is not work- ing properly, or if it has been dropped or damaged, or dropped into water. Do not attempt to repair the appliance. Incorrect reassembly or repair could cause a risk of fire, electric shock, or injury to persons when the appliance is used. Return the appliance to an authorized service center for examination
and repair.
5.Keep the cord away from heated surfaces. Do not pull or twist cord. Let appliance cool completely before putting away. Loop cord loosely around appliance when storing.
6.Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
7.To reduce likelihood of circuit overload, do not operate another high-wattage appliance on the same circuit.
8.Do not use extension cord to operate
appliance. While it is not recommended, if an extension cord is absolutely necessary, a
15ampere rated cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that the cord cannot be pulled or tripped over.
9.Use caution when changing attachments as they may contain hot water from condensation. T-nozzle should never be placed on the unit when in use or when pre- heating. Ensure the attachments are dry or cooled off to avoid contact with hot water.
10.Do not hold steamer during use. Steamer must sit on floor while steaming.
11.Allow unit to cool before emptying reservoir
for storage.
12.Use caution when removing hose cap. Remove slowly.
13.Do not use if unit has been dropped or damaged.
14.Always disconnect appliance from electrical outlet when filling with water or emptying and when not in use.
15.Do not switch on the unit before the hose cap has been secured with the unit.
CAUTION —
1.This appliance should never be left unattended when plugged in.
2.This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
3.Never drop or insert any object into any opening or hose.
4.Do not place the steam nozzle directly on any surface or on the appliance power
cord while it is hot or plugged in. Use the door hook provided.
5.This product emits hot steam during use. Do not touch T-nozzle when product is in use.
6.Do not steam garments while on a person.
7.Before unit is turned on, the hose must be extended and hanging on door hook.
8.Never yank cord to disconnect from outlet. Instead, grasp plug and pull to disconnect.
9.Burns could occur from touching hot metal parts, hot water, or steam. Use care when, you turn a steam appliance upside down -
there may be hot water in reservoir.
10.Use caution when carrying steamer as it contains hot water.
11.Caution: hose will be hot when in use. Avoid prolonged contact.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD USE ONLY NOT FOR COMMERCIAL OR INDUSTRIAL USE
UNPACKING INSTRUCTIONS
Place the box on a large, sturdy flat surface. Carefully remove the appliance from the packing material. Keep all plastic bags away from children.
STEAMER ASSEMBLY/DISASSEMBLY Attaching the Steamer Hose
1.Place hose connector to unit
2.Press buttons on side
3.Place in opening and release. locks in automatically.
Removing the Steamer Hose (make sure unit has cooled)
To remove, just press side buttons and pull out.
Attachments:
To add lint or crease attachments. simply place on T-nozzle.
Hose may be stiff upon removal from box. Hose will relax after initial use. T-handle will sit properly on door hook once hose
is relaxed.
OPERATING
INSTRUCTIONS
FILLING THE WATER RESERVOIR (PRIOR TO PLUGGING IN THE APPLIANCE)
Remove the hose cap. Fill the reservoir with clean tap water to the desired level or until water reaches “Max Fill” line on side of unit. DO NOT OVERFILL as this will cause water to boil out of steamer and spill. Empty until water is just under the overfill indicator. DO NOT FILL
THE CONTAINER WITH HOT WATER.
Hanging the t-nozzle
on the door hook
GETTING TO KNOW YOUR STEAMER
| "T" handle steam nozzle |
| with stay-cool handle and |
Hose cap | turbo steam jets |
|
Removable 5' hose
Water reservoir
Built-in cord wrap (underneath)
(hang T-nozzle here)
Over-the-door hook
crease attachment | lint attachment |
|
This steamer comes with the following accessories:
1.Lint brush: snap onto the T-nozzle and use before steaming to remove lint from the fabric.
2.Crease attachment: snap onto the T-nozzle and use to refresh creases and sleeves.
OPERATING THE STEAMER
1.Over-the-door hanger: hang this over the top of your door and use to hang the T-noz- zle and any garment or hanger. (Overloading may cause deformation of door hook.)
2.Make sure the ON/OFF switch is in the OFF position.
3.Make sure all hose connections are secure and tight.
4.Hang the T-nozzle on the door hook.
5.Plug the cord into a normal electrical outlet.
6.Turn the ON/OFF switch to the
ON position.
7.The switch will light to indicate when power is on.
8.Steam will be produced from the
nozzle in about two minutes. Be sure to keep T-nozzle on the door hook while heating up.
9.To turn steamer off, press ON/OFF switch to the OFF position.
