Concord Camera 3103 manual Installing the Driver & Software

Installing the Software

Installing the Driver & Software

Note: You do not need to install the drivers if you are running Windows,ME, 2000 or XP. Please go to the "Installing the Software" section.

Note to Mac users: You do not need to install drivers or software to transfer pictures. Please see "Downloading Images to a Computer" for instructions.

Installing the Driver

Installing Camera Drivers (Windows 98/98SE)

If your operating system is Windows 98/98SE:

1.Insert the CD into your PC CD-ROM drive. Make sure that your camera is not connected to the computer.

2.A red check mark appears on the left side of each installaiton

choice. Remove all checks except the one for the camera driver by clicking on the checks next to each choice.

3.Click on install.

4.Follow the on-screen instructions. After the installation has finished, reboot your computer. You are now ready to install the software.

NOTE:

If your system requires a manual installation: Click Run, type “(the

CD-ROM drive):/install.exe”, then click OK.

Follow the directions that follow to install all the software.

44