OPERATION (CONTINUED)
TV FORMAT
Select NTSC or PAL video format to correspond with your TV. To set the TV format, follow the instructions below:
1
1
When the power is on, press the MODE button ❶ three times to enter the TV Format Feature Setting menu; “PAL” or “NTSC” will appear in the display.
2
1
2
Press the SELECT/Flash button ❶ to cycle between the modes to select the desired mode. When the desired mode (“PAL” or “NTSC”) appears in the display, press the Shutter button
❷to confirm the setting.
3
2 
1
To use the camera with your TV:
Connect the supplied video cable to the VIDEO OUT jack on your camera and the other end to your TV. Make sure the TV’s video option is set to this jack and turn the camera on. Your images will appear on the screen. Press the SELECT (Next Image) ❶ or MODE (Previous) button ❷ to cycle through the pictures. Press and hold the SELECT (Slide Show) button ❶ for at least one second to activate the slide show. Press any button to stop the slide show.
WARNING: The TV out function draws a larger amount of current from the batteries during its operation. Please be aware that usage of this feature may cause your batteries to drain faster than at normal operation. It is recommended that you be prepared in andvance and have spare batteries available when planning to perform a slide show of your images on a TV set.
18
