Installation of a driver
FX-DS110-PCC 13
3. Installation of a driver
This chapter describes how to install the FX-DS110-PCC on your
PC.

Plugging the FX-DS110-PCC

Follow the procedure below to plug the FX-DS110-PCC on your
PC. To use the PC Card under Windows NT 4.0, shut down the
PC before plugging it in the PC card slot.
(1) Make sure that your PC has a PC Card (TYPE II) slot.
(2) Plug the FX-DS110-PCC into the PC Card slot with the
inserting direction mark s face up.
Notes! -Check the orientation of the card and insert the PC Card slowly.
Applying excessive force to it may break the connector.
-The antenna can be detached so that an optional antenna can be
attached instead. Do not detach or
attach the antenna inadvertently as
doing so degrades its performance.
Do not use the PC Card with no
antenna attached, or the PC Card can
come out of order.
-To the Card Bus slot user
When you use the PC Card in a Card Bus slot on a PC with
incomplete PC Card compatibility, the operation may be
unstable. If this is the case, use the PC Card in the PC Card
dedicated slot.