Installation of a driver
FX-DS110-PCC 21
4. Installation of a driver
This chapter shows the contents of the driver floppy disk for the
FX-DS110-PCC and describes the procedure for installing the
driver. Before proceeding to install the driver, read Chapter 2
“Installing the Hardware” to plug the FX-D110-PCC on your PC.
This chapter contains the driver installation procedures for
Windows Me, Windows 98, Windows 95, Windows 2000, and for
Windows NT 4.0.

Driver software

The “Driver Disk #1” floppy disk is supplied with this product.
Back it up before using the copy and keep the original disk in a safe
place.
The floppy disk contains the following LAN drivers:
-NDIS driver for Windows Me
-NDIS driver for Windows 98
-NDIS driver for Windows 95
-NDIS driver for Windows 2000
-NDIS driver for Windows NT