Installation of a driver
FX-DS110-PCC 19
Figure 3.1. Infrastructure Mode
ADHOC (Simple) Mode
In this mode, all wireless terminals communicate with one another
on a par basis. Since wireless terminals communicate directly
with each other, the most part of setup at installation is not required
and faster communication can be expected than in the AP-
centralized configuration. When installing the terminals, place
them all within their operating distance for communication (to
prevent the hidden terminal problem). In the following example,
the terminals can be connected to Ethernet via the AP (operating in
simple mode). Although the network can be constructed only with
the FX-DS110-PCC, no terminal can be connected to Ethernet in
that case.
Ethernet
AP (ADHOC Mode)
FX-DS110-PCC
Loading PC
LANHELPER
Figure 3.2. ADHOC Mode