Installation of a driver
FX-DS110-PCC24
Installing for Windows 95
For Windows 95, the procedure for installing the FX-DS110-PCC
driver varies a little depending on the version of the OS.
Note! Use the FX-DS110-PCC under Windows 95 OSR2 or later.
It does not operate under an earlier version of Windows 95.
(1) Windows 95 detects the FX-DS110-PCC as a new piece of
hardware at startup and displays a dialog box. Click on “Next”.
In another dialog box that appears, click on the “Next” button.
(2) Click on the “Locate” button.
(3) Insert the "Driver Disk #1" floppy disk into the floppy disk drive,
specify the drive path as follows, then click on the “OK” button.
This procedure assumes the floppy disk drive as drive A.
A:\
(4) Click on the “Finish” button.
(5) If this is the first time for your machine to be networked, the
“Network” dialog box appears. Enter the computer name and
workgroup name, then click on the “Close” button.
Note!
A workgroup requires a workgroup name assigned by the
network administrator.
(6) During copying of files, you will be prompted to insert the
Windows 95 CD-ROM. The next step to take varies
depending on the machine environment. Take the appropriate
step to continue the installation.
-If you have a set of Windows 95 FDs, insert the Windows 95
install FD into the floppy disk drive and click on “OK” as
instructed.
-If you have the Windows 95 CD-ROM, insert it in the CD-
ROM drive and click on “OK”.
-If your PC is a Windows preinstalled machine without the
Windows 95 CD-ROM bundled, specify the following path in
the hard disk. This procedure assumes the hard disk drive as
drive C.
C:\WINDOWS\OPTIONS\CABS